Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: wallacewt on February 24, 2012, 09:30:15 AM

Title: belleville washers
Post by: wallacewt on February 24, 2012, 09:30:15 AM
anybody know of some belleville washers with an id  14.33x31.20x2.25
od and thickness not so important as long as its thereabouts
id can be a bit smaller so i can ream it out
thanks in advance
Title: Re: belleville washers
Post by: Keta on February 24, 2012, 03:25:14 PM
13x29x3
http://www.mcmaster.com/#standard-steel-belleville-spring-washers/=gdzwxb  (http://www.mcmaster.com/#standard-steel-belleville-spring-washers/=gdzwxb)

http://www.mcmaster.com/#washers/=gdzu3r (http://www.mcmaster.com/#washers/=gdzu3r)
Title: Re: belleville washers
Post by: Ken_D on February 24, 2012, 03:26:28 PM
edited. Keta was quicker, as I got the red ink from the macro saying another post was in.
Title: Re: belleville washers
Post by: Keta on February 24, 2012, 03:29:45 PM
You were converting when I was searching.  There are more choices if you search for inch.
Title: Re: belleville washers
Post by: wallacewt on February 24, 2012, 10:52:53 PM
thanks keta/ken-d
Text only | Text with Images