A friend's older Avet is in need of a new crank arm.
He's trying to replace the pin (key 078) but Avet has sent him a new pin that appears way too short compared to the one currently installed. Avet has sent this twice.
Any clues on how to get the correct part?
Thanks
John
I would call Avet and ask them.
if you can get the diameter and length of the pin, i might be able to figure something out.
Quote from: alantani on October 15, 2023, 05:20:24 AMif you can get the diameter and length of the pin, i might be able to figure something out.
Thanks!
3/32 wide and approx 15/32 long
Hope that that's enough to go on. Let me know if there's more info needed. I should just go grab his reels so they're in front of me but I don't want to take them away during this epic tuna bite... but I can, just let me know.
Dan says he's got two of these reels needing this pin.
Thanks,
John
I have stainless steel welding rids that are 3/32". Send a pm with his address. I will cut some and mail them out.