Text only | Text with Images

Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => Shimano => Topic started by: Brewskey on March 10, 2012, 07:42:48 PM

Title: HT-100s for Sedona 2500
Post by: Brewskey on March 10, 2012, 07:42:48 PM
Shimano Sedona 2500
I measured the drag washers in this reel today; looks like they are a 4mm x 17mm x 1mm. Which of these two HT-100 washers do you think would be best?  I was thinking of going with the #56-710 because I won't have to alter the washer to make it fit. But, its quite a bit smaller in OD and a little thicker do you think it will work well? I have several of these reels so I'm going to order a bunch from mysticparts.com.

#56-710 ($0.90) / 7.92 x 14.68 x 1.22
#6-155 ($0.65) / 10.65 x 17.92 x 0.93

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

Title: Re: HT-100s for Sedona 2500
Post by: george.s on March 10, 2012, 08:33:02 PM
why don't you use carbontex the shimano saragosa fit perfect.I used them in my kids reels.
Title: Re: HT-100s for Sedona 2500
Post by: Brewskey on March 10, 2012, 09:03:22 PM
Thats even better. I wasn't sure if it would fit or not.

Thanks!
Text only | Text with Images