Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: Omykiss on May 18, 2024, 02:20:42 AM

Title: Triton Trolling Series needs ID and parts
Post by: Omykiss on May 18, 2024, 02:20:42 AM
I got this reel at an estate sale and it is missing some parts. Specifically, the cross bar (and screws for it), harness lugs, the handle lock screw, and one quadrant screw. 

I've got two questions - first, is this a TTS 30?  Second, can someone point me to where I can get these missing parts?  Thanks!
Title: Re: Triton Trolling Series needs ID and parts
Post by: alantani on May 18, 2024, 02:48:05 AM
welcome.  the cross bar and lugs are not needed, which is why they are probably missing to begin with.  the remaining screws are metric. pretty simple.  i think this is your schematic. the quadrant screw should be a TT 0010 and i have them.  the handle nut screw is either 2.5mm or 3mm.  i have both.  i doubt that a TLD 30 cross bar would work. it's possible, but the cross bar is not needed.  send a pm if you want me to mail you the screws. 

https://www.reelschematic.com/wp-content/uploads/schematics/Shimano/Triton/SHIMANO%20TRITON%20TROLLING%20SERIES%20TTS30-50-50W-80W(87-157).pdf
Title: Re: Triton Trolling Series needs ID and parts
Post by: Omykiss on May 18, 2024, 06:30:26 PM
thanks! I sent you a PM with my address
Title: Re: Triton Trolling Series needs ID and parts
Post by: alantani on May 18, 2024, 09:39:18 PM
 In the mail!!!
Text only | Text with Images