Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Shimano Tutorials and Questions => Topic started by: L Fowler on September 18, 2024, 02:41:20 PM

Title: Shimano Curado 200 Greenie 5 bearing reel schematic.
Post by: L Fowler on September 18, 2024, 02:41:20 PM
A friend gave me a Shimano Curado 200 Greenie 5 bearing. I'm trying to find the right schematic for it but having problems as to which schematic to use. The CU200 is not correct. The CU200B (1994) and 200B5 look like it. Any thoughts as to which one it is?
Title: Re: Shimano Curado 200 Greenie 5 bearing reel schematic.
Post by: redsetta on September 18, 2024, 09:27:54 PM
Is this of assistance?
https://plaig.com.au/shimano/Curado/Shimano-Curado-200E5.pdf (https://plaig.com.au/shimano/Curado/Shimano-Curado-200E5.pdf)
Title: Re: Shimano Curado 200 Greenie 5 bearing reel schematic.
Post by: L Fowler on September 19, 2024, 05:08:17 PM
No sir. It says it's just a Bantum Curado 200 with no letters. When looking at schematics it looks like a CU200 1994. right side plate screws have 3 short screws and 1 long. The CU200 1994 schematic uses 4 screws that are the same length. I don't know if that matters.
Title: Re: Shimano Curado 200 Greenie 5 bearing reel schematic.
Post by: redsetta on September 19, 2024, 09:23:08 PM
Is this the schematic you're looking at?
https://www.reelschematic.com/wp-content/uploads/schematics/Shimano/Curado/SHIMANO%20BANTAM%20CURADO%20200(91-06).pdf (https://www.reelschematic.com/wp-content/uploads/schematics/Shimano/Curado/SHIMANO%20BANTAM%20CURADO%20200(91-06).pdf)
Text only | Text with Images