hi guys,
my name is nagz and i live in darwin in the northern territory of australia. i have been perusing this forum for a while now and it has seriously triggered an urge to get inside some reels :)
well here goes, i have recently got a bit carried away and have taken apart the line roller in my certate hyper custom 4000. being new to this game, i neglected to take a photo or remember how the parts came apart :-\
i humbly ask if there is any one out there who can help me reassemble the unit with a few pics and a walkthrough.
apologies if this is a really noob question
i'm kind of sure that i have done it correctly, however the roller takes a little bit more effort to rotate with braid under tension.
regards,
nagz
G'day nagz,
Schematic here for the original Certate 4000, which only differs mildly from the Hyper Custom: http://www.daiwa.com/PartsDiagram/PartsDiagram/CT3500-4000.pdf (http://www.daiwa.com/PartsDiagram/PartsDiagram/CT3500-4000.pdf)
Hope that's of some assistance.
Good luck, Justin
hi redsetta,
cheers for the heads up.
i had a look, but for some reason the diagram doesn't show the black rubber 'flange'/water guard and it's configuration.
a couple of photos would be gold if there are any
cheers
Sorry nagz - not to hand...
Hopefully someone else will chime in.
You're not referring to the rubber O-ring (#25) are you?
nah,
i think your diagram isn't a hyper certate as the line roller seems to have less/different parts.
http://daiwafishing.com.au/wp-content/uploads/2011/09/CERTATE-4000-HYPER.pdf
here we go.....
it turns out i didn't have enough lubrication on the line roller assembly, problem now solved.
the unit now operates smoothly.
what a doofus i am :)
gotta start somewhere though
glad it worked out. and welcome!
thanks alan.
i'm glad too. certainly got a workout over the easter break :)