Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Tutorials and Questions => Topic started by: Lock45 on February 15, 2025, 08:48:21 PM

Title: HT-100 washer for under the 320GTi main gear.
Post by: Lock45 on February 15, 2025, 08:48:21 PM

Penn has discontinued the #6-875 carbon fiber washer that fits under the 320GTi main gear. What other choices are there. Can I custom fit any particuar washer to replace this discontinued part?

.
Title: Re: HT-100 washer for under the 320GTi main gear.
Post by: foakes on February 15, 2025, 09:17:36 PM
Yes, any washer of the same size will work.

A HT-100 CF would be best.

If you want, just send me the measurements OD & ID (outer and inner diameter.  I would match one up and send it out to you.

N/C.

Best, Fred
Title: Re: HT-100 washer for under the 320GTi main gear.
Post by: Keta on February 16, 2025, 01:24:17 AM
Smooth Drag will have a Carbontex washer that works if Fred doesn't have one.
Title: Re: HT-100 washer for under the 320GTi main gear.
Post by: OhReely on February 16, 2025, 12:48:46 PM
The gear sleeve is the same diameter as a 349 and a 113H. I just use a 6-320 HT100 drag washer.
Title: Re: HT-100 washer for under the 320GTi main gear.
Post by: Lock45 on February 17, 2025, 03:48:14 AM
Thanks for the help guys. I have a few reels to rebuild so I will contact my local Penn parts outlet and grab a few 6-320 washers.
Text only | Text with Images