My Daiwa Fuego 1000 spinning reel handle was making a clicking sound and it seems to be movement within the reel housing. Not much, but enough to be noticeable during retrieve and feel like something tapping my lure. I removed and replaced the handle with no improvement.
I notice the schematic calls out a part not present in my reel. It is item #72 'handle packing' and looks like a washer that could perhaps help tension the main gear and eliminate the play? I checked my Fuego 2500 which also has a little handle play, the schematic for that also shows a handle packing part, and is also not present.
Does this look like a washer to others? I'm wondering if I should try and fit a washer of some sort in there.
https://cdn.shopify.com/s/files/1/0384/6645/3641/files/FGLT1000D.pdf
(https://i.postimg.cc/8PDjMLQm/Screenshot-2025-04-28-at-18-17-23-FGLT1000-D-pdf.png)
Quote from: wahoowad on April 28, 2025, 10:31:50 PMMy Daiwa Fuego 1000 spinning reel handle was making a clicking sound and it seems to be movement within the reel housing. Not much, but enough to be noticeable during retrieve and feel like something tapping my lure. I removed and replaced the handle with no improvement.
I notice the schematic calls out a part not present in my reel. It is item #72 'handle packing' and looks like a washer that could perhaps help tension the main gear and eliminate the play? I checked my Fuego 2500 which also has a little handle play, the schematic for that also shows a handle packing part, and is also not present.
Does this look like a washer to others? I'm wondering if I should try and fit a washer of some sort in there.
https://cdn.shopify.com/s/files/1/0384/6645/3641/files/FGLT1000D.pdf
(https://i.postimg.cc/8PDjMLQm/Screenshot-2025-04-28-at-18-17-23-FGLT1000-D-pdf.png)
IIRC #72 should be a rubber seal that fits on the body to seal around the shaft. #67 is the adjusting shim that sets the mesh of the main/pinion gearset. If the "clicking" changes when you push the handle/shaft laterally towards the body then it can be adjusted by adding/subtracting shims, preferably in 0.05 thickness increments (but that shim size is often hard to find).
cheers
Steve
Quote from: wahoowad on April 28, 2025, 10:31:50 PMMy Daiwa Fuego 1000 spinning reel handle was making a clicking sound and it seems to be movement within the reel housing. Not much, but enough to be noticeable during retrieve and feel like something tapping my lure. I removed and replaced the handle with no improvement.
I notice the schematic calls out a part not present in my reel. It is item #72 'handle packing' and looks like a washer that could perhaps help tension the main gear and eliminate the play? I checked my Fuego 2500 which also has a little handle play, the schematic for that also shows a handle packing part, and is also not present.
Does this look like a washer to others? I'm wondering if I should try and fit a washer of some sort in there.
https://cdn.shopify.com/s/files/1/0384/6645/3641/files/FGLT1000D.pdf
(https://i.postimg.cc/8PDjMLQm/Screenshot-2025-04-28-at-18-17-23-FGLT1000-D-pdf.png)
IIRC #72 should be a rubber seal that fits on the body to seal around the shaft. #67 is the adjusting shim that sets the mesh of the main/pinion gearset. If the "clicking" changes when you push the handle/shaft laterally towards the body then it can be adjusted by adding/subtracting shims, preferably in 0.05mm thickness increments (but that shim size is often hard to find).
cheers
Steve