Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => Ordering Reel Parts => Topic started by: triumphrick on May 12, 2025, 07:43:20 PM

Title: Shimano clamp parts needed
Post by: triumphrick on May 12, 2025, 07:43:20 PM
I am in need of the following TN40N parts.

(4) TGT0756 Rod clamp nut
(4) TGT0758 Rod clamp bolt
(2) TGT0757 Rod clamp

Any help would be greatly appreciated!

Please respond via new email, triumphrick@gmail.com
Phone 352 346 8776

Thanks!
Title: Re: Shimano clamp parts needed
Post by: boon on May 19, 2025, 05:57:42 AM
Shimano has re-numbered basically their entire parts catalogue. I cannot, for the life of me, find the cross-reference for those parts.

I wonder if TN-A parts might fit, I will look at some schematics.
Title: Re: Shimano clamp parts needed
Post by: boon on May 19, 2025, 06:06:40 AM
Have a look at 10JC8 and 10JBV for the nuts and bolts. They are listed for the Talica 8 but look identical on the schematic, at least to my eye. You could try a Talica clamp as well but the spacing might not be right.
Title: Re: Shimano clamp parts needed
Post by: Keta on May 19, 2025, 02:08:27 PM
This BS is one of the reasons I no longer recomend Shimano reels to anyone.
Title: Re: Shimano clamp parts needed
Post by: Lunker Larry on May 19, 2025, 03:18:12 PM
I agree. Their site is a mess. Give them a call with the old part numbers and I'm sure they will clear it up.
They've always been helpful that way.
Title: Re: Shimano clamp parts needed
Post by: Keta on May 19, 2025, 03:22:30 PM
Quote from: Lunker Larry on May 19, 2025, 03:18:12 PMGive them a call with the old part numbers and I'm sure they will clear it up.
They've always been helpful that way.

Yup, they can cross referance.
Text only | Text with Images