Text only | Text with Images

Reel Repair by Alan Tani

Welcome! => Welcome! => Topic started by: colinhogg on September 02, 2025, 10:43:57 AM

Title: First Post
Post by: colinhogg on September 02, 2025, 10:43:57 AM
Hi everyone. Hope all is well. I'm looking for any posts or tutorials regarding disassembly of an Alutecnos 50W 2S. They are not very popular in South Africa and I don't see much content online, apart from the schematics. Any tips or suggestions/areas I should be looking out for during the disassembly would be appreciated.
Title: Re: First Post
Post by: Keta on September 02, 2025, 12:23:35 PM
Hi
Title: Re: First Post
Post by: happyhooker on September 02, 2025, 02:26:37 PM
Greetings from Minnesota USA.  i can't help you with your specific reel, but if anyplace can, it will be from members on this site.

Frank
Title: Re: First Post
Post by: Benni3 on September 02, 2025, 02:39:53 PM
Welcome from Salem virginia,,,, ;D
Title: Re: First Post
Post by: Brewcrafter on September 02, 2025, 04:12:42 PM
Welcome from Southern California!  I will mirror what Frank said; I am willing to bet there is someone on the forum with experience on those reels! - john
Title: Re: First Post
Post by: alantani on September 02, 2025, 04:54:10 PM
welcome!  i've only opened up a few, and it's been years.  the reel is relatively simple.  if you venture forward, take pictures as you go, to keep a record.  it should be straight in, straight out. 
Title: Re: First Post
Post by: foakes on September 02, 2025, 05:48:08 PM
Welcome aboard!

Best, Fred
Title: Re: First Post
Post by: Crow on September 03, 2025, 12:09:26 PM
Howdy!!
Title: Re: First Post
Post by: Bill B on October 18, 2025, 01:48:26 PM
Welcome.
Text only | Text with Images