Print Page - HT 100 question

Title: HT 100 question
Post by: Fishnmike on April 10, 2012, 06:38:10 PM

I receievd my order of HT-100s to replace the washers in my Okumas. I noticed that these washers have tabs on the outter edges. Is there a need to remove these or does it mater?

Thanks,
Mike

Title: Re: HT 100 question
Post by: Bryan Young on April 10, 2012, 07:48:04 PM

you can keep the tabs on if it doesn't interfere with anything. If in doubt, just cut them off.

Title: Re: HT 100 question
Post by: Fishnmike on April 11, 2012, 09:00:03 PM

Thanks Bryan. Just wanted to know if it was an issue before I worked on the drag.

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: Fishnmike on April 10, 2012, 06:38:10 PM