If I could keep from buying more old Penn reels ;D and parts I'd have the funds from the dog sales to have some gears built!!!!
If I was to get gears started what reel would be the best to make the first batch for? Jigmaster/112H? 113H? 114H? Or? I prefer bronze gears but the first run will probably be SS.
What reels need SS dogs? Jigmaster is next and I'm going to have some made for my personal Surfmaster 150 and 100 reels. Is there any interest in 349 type dogs for other reels?
SS handle arms? They will be heavier but lightning cuts can reduce the weight, is there any interest in these?
Anything else?
jigmaster 505hs ss gears Would be nice
Jigmaster/112H 113H 114H 115.
3.25 ss gears for the 114h is a must and you only need the pinion for the 115 ;).
4:1 gears for the 113H, to go with the dogs,
114H would be next. Still waiting for an Accurate reference.
Thanks to the generosity of the people on this board I have a set of Newell 4:1 gears in my double SS dog narrowed 113H (thanks again) that I can take out to use and a set of 505 gears are not that expensive but some of the others I don't have the funds to buy.
I'd be willing to give a SUBSTANTIAL deposit (over replacement cost) for the loan of other gears for dimensions and treat them like I do my grandfathers guns.
Quote from: Keta on April 15, 2012, 05:11:01 PM
I'd be willing to give a SUBSTANTIAL deposit (over replacement cost) for the loan of other gears for dimensions and treat them like I do my grandfathers guns.
Lee: I tried that, but no takers. I hope you have better luck. Dominick
Quote from: Pescachaser on April 15, 2012, 06:24:32 PM
Lee: I tried that, but no takers. I hope you have better luck. Dominick
We might have to pool our funds to get the more expensive gears.
I would love to get some 113 and 114 gears. I tried to help get some 114 gears from a guy on another forum had it for $100 but another buyer is 1st hopefully if his deal falls i'll be next in line.
Two questions:
A friend has a lot of Newells and may have some spare gears. What Newell reel (model #) gears are you using for the 113H?
Which gears do you need to take specs from? It's not clear to me from what you've said.
Quote from: Keta on April 15, 2012, 05:11:01 PM
Thanks to the generosity of the people on this board I have a set of Newell 4:1 gears in my double SS dog narrowed 113H (thanks again) that I can take out to use and a set of 505 gears are not that expensive but some of the others I don't have the funds to buy.
I'd be willing to give a SUBSTANTIAL deposit (over replacement cost) for the loan of other gears for dimensions and treat them like I do my grandfathers guns.
Quote from: Makule on April 15, 2012, 08:13:24 PM
Which gears do you need to take specs from? It's not clear to me from what you've said.
High speed aftermarket gear sets for Penn 500/112, 113H and 114H reels.
Good question Albert.
Quote from: Makule on April 15, 2012, 08:13:24 PM
Two questions:
A friend has a lot of Newells and may have some spare gears. What Newell reel (model #) gears are you using for the 113H?
Which gears do you need to take specs from? It's not clear to me from what you've said.
Quote from: Keta on April 15, 2012, 05:11:01 PM
Thanks to the generosity of the people on this board I have a set of Newell 4:1 gears in my double SS dog narrowed 113H (thanks again) that I can take out to use and a set of 505 gears are not that expensive but some of the others I don't have the funds to buy.
I'd be willing to give a SUBSTANTIAL deposit (over replacement cost) for the loan of other gears for dimensions and treat them like I do my grandfathers guns.
As noted in the PM Lee, I can send you Newell 500/112 gears tomorrow if they're still needed.
Cheers, Justin
We'll keep yours in mind but postage to and from NZ is crazy! Thanks for the Magazine, it looks like NZ is a good place to live.
Hi Lee,
I picked up a few gears for reference from Alan to measure up. Will advise of the differences shortly.
Bryan
Just so you all know I am working on this gear thing with a couple of companies, and am trying to get things straight before I present the situation to you guys... I will keep you posted on my progress... the people in this field seem to be very busy or they don't like me very much because there are 3 weeks in between every conversation.
Thanks
Dom
Hey Lee,
Some ss handles for the 113H woluld be nice. If your interested I can send you some Newell 4:1 gears for the 113H.
Leo
i have a stainless steel arm for the 4/0 senator 113h that is patterned after the penn international 30 arm.
Lee, any update on any of the parts?
Quote from: Makule on June 14, 2012, 04:24:58 AM
Lee, any update on any of the parts?
Good question !!!
Dave, that's a four year old thread. :D
I do wonder if Lee has some 113h gears for me tho.,lol.