Good afternoon y'all! Long time listener, first timer caller here.
I'm looking to start a new build and I want to see if someone could confirm what I think might work for a 320 GTI build.
On Mystic's website, under the 320 GTI parts, it shows the 4/0 Senator drag stack (part # 7C-113H) as a replacement part, but it's a 5/5 stack instead of a 3/3. Does the 320 GTI and 4/0 use the same size drag washer? And if so, in theory, would the BY 5+1 Drag kit (UU-PENN113) work in the 320? Or would it essentially be the same thing as the 7c-113H kit?
What am I missing here? In the end I am just trying to see what I can do to add a little more "umpf" wherever I can to the 320.
Thanks for the help! I've lost so many hours going down rabbit holes on this forum, but gained so much knowledge and insight. So did I really lose those hours? ;D
Alan uses these and will likely have this intel for you.
The 320gti has basically the same gear train as the 113H. So the drag stack will work. The biggest limitation is the graphite frame. I believe you are safe up to 15# beyond that frame twist is a real concern. I keep mine at 10# Bill