Text only | Text with Images

Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => Daiwa => Topic started by: jgp12000 on June 15, 2026, 04:28:22 PM

Title: Daiwa Bail Trip Bumper Replacement?
Post by: jgp12000 on June 15, 2026, 04:28:22 PM
I looked at a few schematics & haven't found any p/n for the bail trip bumpers
yet. So I found any interesting plastic repair video in the rabbit hole.I have seen them before ,but its pretty "Macgyverish"

https://youtu.be/_Ax55T-CCRE?si=mRg89mpzABaI7dIY
Title: Re: Daiwa Bail Trip Bumper Replacement?
Post by: bushleague on June 15, 2026, 04:45:04 PM
Quote from: jgp12000 on June 15, 2026, 04:28:22 PMI looked at a few schematics & haven't found any p/n for the bail trip bumpers
yet. So I found any interesting plastic repair video in the rabbit hole.I have seen them before ,but its pretty "Macgyverish"

https://youtu.be/_Ax55T-CCRE?si=mRg89mpzABaI7dIY

 My favourite feature of the external trip is that they are less prone to snapping the bail shut on the cast, and since I prefer to close mine by hand anyways, if I ever lost a bumper I would likely just cut off the nub and get rid of the bail trip entirely.
Title: Re: Daiwa Bail Trip Bumper Replacement?
Post by: Gfish on June 15, 2026, 10:21:45 PM
Cool, a bent nail plastic welder. I like the music, too.
Title: Re: Daiwa Bail Trip Bumper Replacement?
Post by: jgp12000 on June 15, 2026, 10:54:26 PM
Ain't heard the music yet it normally is quasar! I use CC mostly
If the creator has a windstorm going or talks 15 mins about their pet rock,weather,before What It gets to what I wanna actually listen to...

I like these type videos no mindless babble
Text only | Text with Images