Text only | Text with Images

Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => Daiwa => Topic started by: jgp12000 on June 26, 2026, 05:10:56 PM

Title: 1000C cover screw size?
Post by: jgp12000 on June 26, 2026, 05:10:56 PM
I just got a 1000c that is missing a cover screw.My micrometer measured one of the others at 2.42mm.I miced
A 3-48 screw I had  at 2.42mm as well.It fit
in the hole,but threads are different.

So I am thinking it may be a 2.5mm?
Title: Re: 1000C cover screw size?
Post by: foakes on June 26, 2026, 09:22:21 PM
Quote from: jgp12000 on June 26, 2026, 05:10:56 PMI just got a 1000c that is missing a cover screw.My micrometer measured one of the others at 2.42mm.I miced
A 3-48 screw I had  at 2.42mm as well.It fit
in the hole,but threads are different.

So I am thinking it may be a 2.5mm?

Do you need a sideplate screw, James?

If so, I'll send one out, N/C.

Best Regards, Fred
Title: Re: 1000C cover screw size?
Post by: jgp12000 on June 26, 2026, 10:15:47 PM
Yes sir!
Thank you
Title: Re: 1000C cover screw size?
Post by: foakes on June 27, 2026, 12:06:27 AM
Quote from: jgp12000 on June 26, 2026, 10:15:47 PMYes sir!
Thank you

Mailed at the Post Office.

Best, Fred
Title: Re: 1000C cover screw size?
Post by: jgp12000 on June 27, 2026, 12:20:10 AM
That is service!
Text only | Text with Images