Print Page - Stuck Inner Ring Penn 12/0

Title: Stuck Inner Ring Penn 12/0
Post by: Blue Collar Bob on May 08, 2012, 09:28:06 PM

A very generous fellow on another fishing forum sent me an older senator with bushings and a three piece spool to rob parts off of for a reel I'm trying to repair. The spool on his donor reel busted. I need one inner ring and one outer ring off of the donor reel. I'm having trouble separating one of the rings from the side plate. The fit is tight, with no gaps to gently pry at. Anyone have any tips for removing the ring without damaging the ring and/or side plate.

Also, the click drag was missing from the reel I'm working on(chrome spool). This part was on the donor reel. It appeared to be soldered on and I removed the two pieces cleanly. The three piece spool was keyed to receive these parts, but the spindle on mine is round. I'm considering just centering them up and soldering them. I'm open to suggestions if anyone has a better idea to offer.

Thanks, Bob

Title: Re: Stuck Inner Ring Penn 12/0
Post by: redsetta on May 08, 2012, 09:53:37 PM

G'day Bob,
I work a box knife (or blade) around the edge of the ring, gently prying as I go.
Once the gap opens up a little, step up to a wider/stronger blade or screwdriver - go easy though.
It may take a few times around, but has always worked for me.
Good luck, Justin

Title: Re: Stuck Inner Ring Penn 12/0
Post by: Blue Collar Bob on May 08, 2012, 10:34:41 PM

Thanks redsetta. I gave it a bit of a go with a knife earlier, but the blade wasn't nearly as fine as a box cutter and I didn't want to try to force anything. I'll try that tonight. Man, this reel has a very tight and smooth seam where the ring and side plate join. I hate that the spool busted on the fellow that sent it to me, because this reel has beautiful side plates. He's a real generous man to help me out. The clicker gear is something that has been hard to find.

Title: Re: Stuck Inner Ring Penn 12/0
Post by: Blue Collar Bob on May 09, 2012, 08:37:02 PM

Got it. Thanks redsetta.

Title: Re: Stuck Inner Ring Penn 12/0
Post by: john2244 on May 09, 2012, 08:47:04 PM

X2 on Justin's comments. I start a with single edge razor blade and spray some WD40 between the ring and the side plate. Then move up to a knive with a wider and stronger blade. Sometime I need to let to set for awhile but they have always come off.
John

Title: Re: Stuck Inner Ring Penn 12/0
Post by: Alto Mare on May 09, 2012, 09:24:06 PM

Good idea with the blade guys. Just be careful with that WD-40, it might cause the plates to swell, if you use enough of it.

Title: Re: Stuck Inner Ring Penn 12/0
Post by: alantani on May 10, 2012, 04:27:05 AM

yup, old pocket knife and something to tap it with. go very slowly. :-\

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: Blue Collar Bob on May 08, 2012, 09:28:06 PM