I'm looking for some SS Bellville washers and the only sourse I've found so far wants over $30.00 to ship 4 of them, I will not pay that much for something I ship for less than $1.00. Does anyone know where I can get a small quanity of Stainless Bellvilles, ID, .50", OD 1.25" for a reasonable price?
Hi Lee,
What is the height and thickness that you need?
Bryan
Lee,
What reel does that fit ?? I may have some you can have. Also, how many do you want ??
John
Bryan,
Around .050" and .035" thick and around .70" tall.
OD 28mm ID 14.2mm, Height 1.8mm
1.5mm and .8mm thick
I can grind the OD if needed.
John,
They are for the 349H.
I'm looking for 5 but one or two would let me see if they help flaten the drag curve on the 5+1 conversion. I have one in now that is 113H size and it helped.
Lee,
Sorry, no luck on the washers.
John
Alan's got it covered below. :)
lee, the washers i use for the penn 113h is 0.525 ht x 0.975 od x 0.035 th x 0.065 ht. got a bunch if you need them.
Did you try McMaster & Car? I bought bevel SS washers [small ones ] from them
i bagged up four and will ship them out for you to look at.