ok fellas need some info on jigmasters. i want to build a good strong jigmaster. i need info on the different classifications 500, 500s.501 etc.american made stuff . i dont think i want to go with the accurate or tiburon side plates that would give up the quick change feature of the side plate. i like the fact that i can carry the guts of the reel in my bag rather than a whole reel.what should i be buying thats available now and what should i be searching for on ebay and the internet.thanks fellas
Depending on what line you will be using, but I'd choose 501. I love narrow reels esp. since spectra came out.
I'm with Bryan, I like the narrow 501's (4.0:1) and the 506's (5.0:1). On the 500S the left hand side plate is the quick change side vs the handle side on all other jigmasters. I think the 500S was only made for a couple of years.
John
Quote from: john2244 on May 25, 2012, 11:59:48 PM
On the 500S the left hand side plate is the quick change side vs the handle side on all other jigmasters. I think the 500S was only made for a couple of years.
John
I have a 500S and I really like it. The whole quick change plate on the left side was a little confusing at first but I got used to it quickly. It has a Tiburon narrow frame and spool and Newell gears added.
(http://i197.photobucket.com/albums/aa153/hardcoretank76/Reel2.jpg)
(http://i197.photobucket.com/albums/aa153/hardcoretank76/Reel.jpg)
That's a beauty BH, thanks for sharing.
Cheers, Justin
I agree with Bryan. I also like the narrow version of these reels more. I have 2 501's that I use to bottom fish in So. Cal. Both are spooled with 300 yards spectra over monofiliment (as a filler). I have 2 506's for surface fishing. They have ball bearings instead of spool bushings & a faster ratio.
The quick take-down feature makes the reel easier to service the spool bearings, but I've never changed a spool on a boat. If a different line class is required, I just use another outfit. The narrow Penns were discontinued at least a decade ago & new/good spare spools are costly.
I think the 2 biggest improvements that can be made on these reels is a frame change like BurningHeart's very nice example of an older 501 & a Penn 24-56 handle. Neither one of these changes are necessary, but in my opinion, they make a very fishable reel even better.
beautiful reel BH..
is 501 a good caster from pier or jetty?
Snagger,
If you want a bullet proof (or at least bullet resistant ;)) jigmaster, then you need an Accurate or Tiburon 501 frame, steel gears, and stainless gear sleeve. Those frames won't flex and a narrow spool distributes the stress more evenly on the spindle and bearings. Also a Penn aluminum or Newell spool and a Penn 24-56 power handle. I'm sure I left something out, but that's for starters. ;D
George
Quote from: Danhans on July 04, 2012, 03:28:15 AM
beautiful reel BH..
Is a 501 a good caster from pier or jetty?
Its not too bad although I don't do much jetty or pier fishing. I do more sportboat stuff, it casts decent(approx. 40-50yds) but I'm gonna put some bearings in place of the bushings so I can get more distance.