Hey guys i cracked open this reel today and made a final inspection since i wanted to sell it, i should have not touched it. The drag on this reel is kind of weird so if you look at the schematics
http://www.quantumfishing.com/CustomerService/ReplacementParts.aspx?ProductID=2579
You can see that theres a knob on the left side of the frame. That knob spins a gear that tightens the drag. Well that gear that tightens the drag has two springs and these metal peices under it (keys 19,20) and i lost one of each when they popped out. Anyone have a spare of these their willing to part with one? Do i really need that spring and metall peice? I still have one of each that stayed in place but i dont know if i need the other one. I learned something new though, if theres springs involved back off or just do it wisely. Thanks guys.
I am sure you can order them from Quantum...
http://www.quantumfishing.com/customerservice/replacementparts.aspx
OR !!!!
I have a Brand new in the Box Complete Frame for a 20...
Parts may be the same, or if you have the 20, you could have a new frame!! :-)
Cost of shipping its yours.... (shameless plug to get rid of it).. ;D
Lol how much is shipping on it?
Hey nessie i just checked the schematics and its suppost to have that gear can you please send me the dimensions of the springs and metal peice then ill be happy to take it off your hands. Thanks.
Postage from Tulsa, Ok to Southern Cal (Prority USPS) says $7.83...
That was on 3 of 2011....
I can just change labels & Send......
Where are you at????
After I ship, Ill let ya know what it is and I have Paypal... Done, piece of cake!!!
Then you open it and measure... LOL ;D
Lol im in north hollywood but please can you just check the dimensions first cause i only need the springs on that thing.
No metal pieces/spacer/washers????
But a spring & clicker "bullet" (like the clicker on a Star drag).
Nylon piece below that it clicks on..
(18 Preset Idle Gear Click Plate).
""Only 1 spring and 1 Bullet/clicker in this one, but had holes for 2"" ?????
(maybe you didnt lose one??)...
But you still need this one!!!! :-) ;D
Bullet/clicker is 2mm Dia and about 3.5 mm long..
spring is Tiny Almost 2 mm wide & 5 mm long....
Fits over back skinny part of Bullet/clicker, they stay together when taken out...
It is just enough to give you a feel & light noise of clicking when you depress & turn outer ring.
All 3 of those parts in schematic come to total of $2.96.....
Plus shipping from Tulsa, Ok....
BTW, the parts Numbers on the 30 are the same as 18, 19, 20 on the 20...
KF113-01
JF108-01
KF070-01
Same parts, interchangeable.....
.
Wow really? Ill still take it though let me measure mine too and ill get back to you. My gear had two holes on the bottom also but that metal peice was in one hole and the spring in the other.
Quote from: Nessie Hunter on May 26, 2012, 04:16:47 PM
OR !!!!
I have a Brand new in the Box Complete Frame for a 20...
Parts may be the same, or if you have the 20, you could have a new frame!! :-)
Cost of shipping its yours.... (shameless plug to get rid of it).. ;D
i never would have believed in a million years that you would have found a home for this.
Quote from: alantani on May 27, 2012, 05:21:06 AM
Quote from: Nessie Hunter on May 26, 2012, 04:16:47 PM
OR !!!!
I have a Brand new in the Box Complete Frame for a 20...
Parts may be the same, or if you have the 20, you could have a new frame!! :-)
Cost of shipping its yours.... (shameless plug to get rid of it).. ;D
i never would have believed in a million years that you would have found a home for this.
Me either, What a stroke of luck huh?? LOL :-)
.
Quote from: Biggameaddict on May 27, 2012, 05:10:39 AM
Wow really? Ill still take it though let me measure mine too and ill get back to you. My gear had two holes on the bottom also but that metal peice was in one hole and the spring in the other.
LOL.... I can see how that would happen. ::)
Zebco/Quantum... ::)
These are actually a pretty solid reel... Once you get the bugs out...
.