What are the measurements of the bearing on the left side of the spool (under the plastic gear? The schematics only give part #'s not actual sizes.
Thanks,
Brian
i found the schematic. http://www.mikesreelrepair.com/schematics/albums/ambassadeur/Ambassadeur_UC_5600C_06_00.pdf it should be a standard 4x11x4mm. did you need one? you can get them at smoothdrag.com with drag washers and cal's grease. alan
Thanks for the info. I had looked on a schematic that gave the part number, but no size, and my micrometer is at my fathers house. I have a shopping list of things I need to get from Smooth drag.
tell dawn that i said "hi!"