Dear Friends,
i'm kinda confused to find these reels roller bearing dimension, maybe anyone knew?
1. shimano stella 10K SW, 18K SW, 20K SW
2. Shimano Saragosa 18K F
3. Shimano Biomaster 8K
that's all for now. thanks
Your Shimano agent should know,otherwise strip the reels and measure the roller bearings.
The roller bearings are very,very hard to match.
I would strongly recommend you get them at Shimano..
This way you are sure to get the correct fit for the Reel, also it will fit the Sleeve/collar.
Or possibly "Boca Bearing".
Boca is slowly trying to get most Factory Bearings made to correct sizes..
They may just have the right one..
Quote from: Nessie Hunter on September 13, 2012, 06:39:38 PM
The roller bearings are very,very hard to match.
I would strongly recommend you get them at Shimano..
This way you are sure to get the correct fit for the Reel, also it will fit the Sleeve/collar.
Or possibly "Boca Bearing".
Boca is slowly trying to get most Factory Bearings made to correct sizes..
They may just have the right one..
i tried to look at the boca listing and smoothdrag listing, but unfortunately only 5x9x2 and 5x9x3 is available.
Quote from: Marko on September 14, 2012, 09:16:49 AM
Quote from: Nessie Hunter on September 13, 2012, 06:39:38 PM
The roller bearings are very,very hard to match.
I would strongly recommend you get them at Shimano..
This way you are sure to get the correct fit for the Reel, also it will fit the Sleeve/collar.
Or possibly "Boca Bearing".
Boca is slowly trying to get most Factory Bearings made to correct sizes..
They may just have the right one..
i tried to look at the boca listing and smoothdrag listing, but unfortunately only 5x9x2 and 5x9x3 is available.
Are you talking about the "Anti Reverse" Roller Bearing...
5x9x3 sound very odd for a roller bearing = 3 mm thick????
Here is the Saragosa:
http://fish.shimano.com/media/fishing/SAC/techdocs/en/Saltwater_Spinning/08SRG18000F_v1_m56577569830646557.pdf
Note that part #5447 is the Roller Bearing assembly.
Part # 12064 is the Radial bearing that is associated with it...
Also, do you know the size of the bearing/bearings you need??
.
Quote from: Nessie Hunter on September 14, 2012, 06:23:33 PM
Quote from: Marko on September 14, 2012, 09:16:49 AM
Quote from: Nessie Hunter on September 13, 2012, 06:39:38 PM
The roller bearings are very,very hard to match.
I would strongly recommend you get them at Shimano..
This way you are sure to get the correct fit for the Reel, also it will fit the Sleeve/collar.
Or possibly "Boca Bearing".
Boca is slowly trying to get most Factory Bearings made to correct sizes..
They may just have the right one..
i tried to look at the boca listing and smoothdrag listing, but unfortunately only 5x9x2 and 5x9x3 is available.
Are you talking about the "Anti Reverse" Roller Bearing...
5x9x3 sound very odd for a roller bearing = 3 mm thick????
Here is the Saragosa:
http://fish.shimano.com/media/fishing/SAC/techdocs/en/Saltwater_Spinning/08SRG18000F_v1_m56577569830646557.pdf
Note that part #5447 is the Roller Bearing assembly.
Part # 12064 is the Radial bearing that is associated with it...
Also, do you know the size of the bearing/bearings you need??
.
No Mate, You got it wrong ;D . it's the line roller bearing.. which smoothly guide Your line to the spool.
havent found the exact bearing size until now.. the local shimano dealer also dont have the size either..
it has to be a standard, off the shelf, size. no one would make a bearing for just this application. :-\
The bearing you need is a standard "ball" bearing part # RD 11424 and not a "roller" bearing.