Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => Smoothdrag.com => Topic started by: Whiteman on October 17, 2012, 09:18:39 AM

Title: Curado CU-100B pack - why 2 washers?
Post by: Whiteman on October 17, 2012, 09:18:39 AM
I received the Shimano Curado 100B Carbontex drag washer pack today (thanks for prompt service!).

It comes with 2 washers. My 100B only seems to have the small washer to replace. Is the large washer in the pack for any reason?
Title: Re: Curado CU-100B pack - why 2 washers?
Post by: Nessie Hunter on October 17, 2012, 06:02:53 PM
http://fish.shimano.com/media/fishing/SAC/techdocs/en/Low_Profile/01CU100B_v1_m56577569830641823.pdf

Note #1214 that is the Under Washer & goes under the main gear.
Note # 2360  That is the drag washer that goes inside the Main gear (Sandwiched between metal washer and bottom of Gear)....

Replace & grease them both...   Your good to go.... 




.
Title: Re: Curado CU-100B pack - why 2 washers?
Post by: Whiteman on October 18, 2012, 05:31:10 AM
You are a genius NH! This wasn't obvious when I dismantled the spool. Thanks!
Title: Re: Curado CU-100B pack - why 2 washers?
Post by: chockpish on December 08, 2012, 12:03:32 AM
Hi Dawn, I am wondering if I can get some carbontex sheets from you. I live in Canada!I have a bunch of reels spinning and casting, I would like to upgrade my drags on my casting reels, I have some Browning, Abu C4, Ocean master. I was wondering what the price would be with the shiping and duties and all that good stuff! Also how many drag rings can one sheet of carbontex can yield?You probably get this question one hundred times a day! Looking forward to you answer!

Thanks in advance!
Text only | Text with Images