Print Page - Pro Gear CS501 & PG255

Title: Pro Gear CS501 & PG255
Post by: bradz on October 24, 2012, 02:31:47 AM

Hi guys

Recently I acquired an Albacore Special 280. Great piece of equipment. I was wondering if the CS501 and PG255 are the same physical size as the AS280.

Can anyone help me? Basically want to know if they are narrower than the AS280.

There is absolutely nothing wrong with the reel but am looking to see if there is a narrower option in the ProGear range.
I look forward to your responses.

PS: If I can find a narrower PG then I may sell the AS280 on this board. It has only been used once by me and by all reports it was never used by the previous owner. I also installed carbontex drags when I got it.

Cheers
Brad

Title: Re: Pro Gear CS501 & PG255
Post by: john2244 on October 24, 2012, 04:30:14 AM

Hello Brad,

Overall the PG 255 is a smaller reel than the PG 280. ID of the 280 frame is approx 1 5/8" whereas the ID of the PG 255 frame is approx. 1 3/8". Also, my 255 with line weights 19 oz and my 280 with line weights 23 oz. The little info I have on the 501 states without line it weights 18 oz and it came with a gear ratio of 6.0:1. Also, the 280 came with a gear ratio of 6.0:1 and the 255 came with a gear ratio of 5.0:1 but can be lowered to a gear ratio of 4.0:1.

John

Title: Re: Pro Gear CS501 & PG255
Post by: bradz on October 24, 2012, 05:18:02 AM

Hi John
That's great. What about the overall height of the reel. Is the 280 taller?
Cheers
Brad

Title: Re: Pro Gear CS501 & PG255
Post by: john2244 on October 24, 2012, 05:25:56 AM

Brad,
Yes, the 280 is a little taller. The gear box is much larger in the 280.
John

Title: Re: Pro Gear CS501 & PG255
Post by: bradz on October 24, 2012, 12:47:29 PM

Last question...(maybe) so, are the cs501 and PG255 the same dimensions or is the 255 smaller?

Title: Re: Pro Gear CS501 & PG255
Post by: Bryan Young on October 24, 2012, 05:33:25 PM

I'll take a pic of the reels side by side when I get back to California

Title: Re: Pro Gear CS501 & PG255
Post by: bradz on October 25, 2012, 12:45:30 AM

Thanks Bryan

Title: Re: Pro Gear CS501 & PG255
Post by: joel8080 on October 25, 2012, 08:11:33 PM

Hi Brian

Is there a list out there that shows all the Penn parts that fit Pro Gear reels?. It would be a great list to have, any ideas?.

Joel

Title: Re: Pro Gear CS501 & PG255
Post by: Bryan Young on October 26, 2012, 06:26:40 AM

(http://i986.photobucket.com/albums/ae348/hawaiiansurfinboy/5165A220-06C8-46BE-863A-4C3F6E37C514-972-00000059B37CFCC8.jpg)
(http://i986.photobucket.com/albums/ae348/hawaiiansurfinboy/6BA85D4A-122E-4F0C-91EF-AF8C961DF258-972-00000059AC50F24E.jpg)
(http://i986.photobucket.com/albums/ae348/hawaiiansurfinboy/E99EC393-2901-4E68-AA85-17B4BF87ECE2-942-000000599213BC96-1.jpg)
Gunmetal is an AS280, gold is a PG255, and aluminum is a CS500 (similar to a CS501 except not as polished)

Title: Re: Pro Gear CS501 & PG255
Post by: bradz on October 26, 2012, 12:23:48 PM

Hi Bryan

That sure does show that the AS280 is much larger than the 255 and 501

thanks for the photos.

PM Sent

Cheers
Brad

Title: Re: Pro Gear CS501 & PG255
Post by: Brendan on October 27, 2012, 03:24:04 PM

I think the CS501 Is the smaller of the group with a 1 7/16" frame I.D. I have a year on mine and love it.
Brendan.

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Pro Gear Tutorials and Questions => Topic started by: bradz on October 24, 2012, 02:31:47 AM