Print Page - Penn 349 reels

Title: Penn 349 reels
Post by: turboal on October 18, 2009, 07:47:49 PM

Anybody do any reworking of the drag washers using the 113h
thin drags, or replacing the bridge with a 113h or the Newell
steel upgrade gear set 4:00-1 ratio for a 113h or is the 349 setup
stronger than a 113h ? will the ht-100 drag kit for a 113h fit in.

Title: Re: Penn 349 reels
Post by: alantani on October 19, 2009, 05:40:00 AM

you should be able to fit a #6-113h, but it's going to wobble. it's been a while since i've looked at one of these. alan

https://www.mysticparts.com/PennParts/Penn349H.aspx (https://www.mysticparts.com/PennParts/Penn349H.aspx)

"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

Title: Re: Penn 349 reels
Post by: turboal on October 19, 2009, 05:34:20 PM

Hi Alan, is the 113h a stronger reel than the 349 ?

Title: Re: Penn 349 reels
Post by: alantani on October 20, 2009, 04:26:48 PM

they're about the same.......

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Tutorials and Questions => Topic started by: turboal on October 18, 2009, 07:47:49 PM