Print Page - Replacement parts

Title: Replacement parts
Post by: SixShooter on November 12, 2012, 05:54:45 PM

I have 5 or 6 Penn Senators 113H that I would like to replace the drag washers on. I like to know which washers are recommended and where to get them. These reels are used exclusively for trolling albacore, if that makes any difference in the recommended washers.

Title: Re: Replacement parts
Post by: Keta on November 12, 2012, 06:06:33 PM

Penn HT-100 washers are good but I've been converting my reels to Smooth Drag's Carbontex.

http://www.smoothdrag.com/

Title: Re: Replacement parts
Post by: alantani on November 12, 2012, 07:32:13 PM

you can order them here. https://www.mysticparts.com/PennParts/Parts/6-113HSP.aspx (https://www.mysticparts.com/PennParts/Parts/6-113HSP.aspx)

while you are at it, also order the #6-875 to go underneath the main gear. https://www.mysticparts.com/PennParts/Parts/6-875.aspx (https://www.mysticparts.com/PennParts/Parts/6-875.aspx)

don't forget the cal's grease. https://www.mysticparts.com/LubesCleaners/Cals2Speed/T1oz.aspx (https://www.mysticparts.com/LubesCleaners/Cals2Speed/T1oz.aspx)

https://www.mysticparts.com/LubesCleaners/Cals2Speed/T1oz.aspx

Title: Re: Replacement parts
Post by: alantani on November 12, 2012, 07:34:38 PM

and to make matters worse, there is a gear sleeve and handle upgrade! http://alantani.com/index.php?topic=5180.0

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: SixShooter on November 12, 2012, 05:54:45 PM