I have 15-500 (500, 501), 15-309 (309, 112H), 15-200 (100, 150, 200) and 15-99 (99, 60, 65, 66, 68, 111, 112, 113, 285) dogs drawn up, they use the same material.
When I get some SS in .080 what dogs should I have cut first.
I'm thinking, 15-500 first, then 15-309 and 15-200 with the 15-99 last.
can you work with sheets that are 12 inches x 12 inches?
Hello Lee,
When the dogs are available I would like to place an order for the 15-500 and 15-99.
John
Quote from: alantani on November 18, 2012, 06:13:01 PM
can you work with sheets that are 12 inches x 12 inches?
Yes
Quote from: john2244 on November 18, 2012, 06:20:46 PM
Hello Lee,
When the dogs are available I would like to place an order for the 15-500 and 15-99.
John
Ok
You could probably do a run of all three and make everyone happy. About the 15-140, if you get them going as well, were they going to drill them?
Not sure, I need a squidder or a 15-140 to measure.
Lee,
If you don't get a 15-140 in the next few days let me know. I will take one of my squidder apart and send you the dog.
John
Quote from: john2244 on November 18, 2012, 10:03:52 PM
Lee,
If you don't get a 15-140 in the next few days let me know. I will take one of my squidder apart and send you the dog.
John
John, don't take that Squidder apart, I think I found one ;)
(http://i1101.photobucket.com/albums/g431/pescatore1/007-5.jpg)
Lee, let me know if you need it and I'll send it right out.
Send it and I"ll get it drawn up and cut.
show off....... ;)
OK Sal, I think you might have one !!!
500, 99, 309 then 200? The 15-140 will be done as soon as I get one to measure and material is here.
Will 2 112Hs work to double dog a 112h? or do you need a different second dog?
Anyways, put me on the list to end up with a double dogged 112h and 4 dogs for 66s.
Ron
G'day Ron,
Yeah, two 112h dogs will do the trick.
There's not much meat in the sideplate, so you may need to consider one of the following options:
- http://alantani.com/index.php?topic=3935.msg35173#msg35173 (http://alantani.com/index.php?topic=3935.msg35173#msg35173)
- http://alantani.com/index.php?topic=3935.msg33136#msg33136 (http://alantani.com/index.php?topic=3935.msg33136#msg33136)
Good luck, Justin
PS Lee, once available, I'd like six 15-500 and two 15-309 - thanks!
Lee, when you get the chance I will need 6 of the 500.
Bob
Lee, I need 5 of 15-99, Thanx ;)
hello lee! if you can mail it to my address in brasil i want 6 for the 112h n 6 for the 113h. thanks!
It shouldn't be a problem to get them down to you.
Right on Lee! Sign me up for 12 of the 15-500's.
Keith
I confuse easily, when they are cut and tested I'll post again but I'll try to keep track of pre orders.