Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: Jumpin on December 13, 2012, 01:01:20 AM

Title: Shimano Beastmaster 4/0 Question
Post by: Jumpin on December 13, 2012, 01:01:20 AM
I took the handle off my reel and when I was removing the small plate that holds the sliding part that shifts the reel to high gear and a small spring came out. Now I am having a heck of a time figuring where it came from to put the reel handle assymbley back together. Anybody have advice or even a picture of where it goes? ??? Thanks
Title: Re: Shimano Beastmaster 4/0 Question
Post by: Bryan Young on December 13, 2012, 01:25:57 AM
Do you have pictures of the spring with a reference to the size on a ruler or next to the reel?
Title: Re: Shimano Beastmaster 4/0 Question
Post by: SoCalAngler on December 13, 2012, 06:47:47 AM
It should be the same as the one shown in Alan's TLD 20/30 II breakdown. Go check it out on the Shimano board. Mine went "boing" never to be found then I tore down my TLD 30 II but that was before I found this site.
Title: Re: Shimano Beastmaster 4/0 Question
Post by: alantani on December 13, 2012, 06:55:06 AM
steggs did this one.  http://alantani.com/index.php?topic=269.0
Title: Re: Shimano Beastmaster 4/0 Question
Post by: Jumpin on December 13, 2012, 12:49:13 PM
Wow! One day and I have my answer. Thanks guys, awesome!
Text only | Text with Images