Print Page - Van Staal Vs 100 Main Gear

Title: Van Staal Vs 100 Main Gear
Post by: Shipmaster on December 28, 2012, 04:26:49 PM

Hello Everybody,
I'm looking for New or Used Van Staal Vs 100 Main Gear.
If you can please contact me.

(http://kepfeltoltes.hu/thumb/121228/maingear_big_www.kepfeltoltes.hu_.jpg)

Title: Re: Van Staal Vs 100 Main Gear
Post by: Dr. Jekyll - AKA MeL B on December 28, 2012, 07:34:12 PM

have you check out their dealer, if not here's a link to their site;

http://www.vanstaal.com/dealers/Default.aspx

hope this helps, tight lines!

Title: Re: Van Staal Vs 100 Main Gear
Post by: Bryan Young on December 28, 2012, 07:35:47 PM

Aren't those gears supposed to be made out of stainless steel? What happened where you need a new gear?

Title: Re: Van Staal Vs 100 Main Gear
Post by: Shipmaster on December 29, 2012, 07:25:09 AM

Hello,
It's an old Van Staal model. It could not disassembled with wrench. So it was disassembled with wrong method. The gear was damaged.

I can't purchased it on dealer because I'm a hungarian fisherman.

I would like to buy it from somebody. ;)

Title: Re: Van Staal Vs 100 Main Gear
Post by: Dr. Jekyll - AKA MeL B on January 02, 2013, 12:11:50 PM

have you checked ebay ???

Title: Re: Van Staal Vs 100 Main Gear
Post by: alantani on January 04, 2013, 09:55:19 AM

spinners are tough. they're just not built to last........

Reel Repair by Alan Tani

General Maintenance Tips => Ordering Reel Parts => Topic started by: Shipmaster on December 28, 2012, 04:26:49 PM