Print Page - 15-500 and 15-309 SS Dogs

Title: 15-500 and 15-309 SS Dogs
Post by: Keta on January 03, 2013, 08:43:47 PM

I fianaly got some useable 15-500 and 15-309 (112H) dogs cut but have some minor changes to make with contact angles and the 15-500 has a unacceptable taper in the hole but these are minor drawing changes and a production error. On Tuesday I'll get the first production run cut.

I ran into a minor change with the 15-500, does it matter if the cutout for the spring isn't there? Left dog on the right side of photo. It's an easy change. The dogs in the photo have not been polished.

(http://i54.photobucket.com/albums/g104/IGFA19Keta/DSCN1275_zps20e18b8e.jpg)

Title: Re: 15-500 and 15-309 SS Dogs
Post by: Irish Jigger on January 04, 2013, 12:49:40 AM

I have never seen a cutout on a 15-500 dog and don't think one is necessary as the spring is secured at one end anyway. There is a small cutout (like on the left dog in the photo) on both the 15-85 and 15-99 dogs.
Nice work Lee.

Title: Re: 15-500 and 15-309 SS Dogs
Post by: George4741 on January 04, 2013, 03:26:31 AM

Nice craftmanship.

Title: Re: 15-500 and 15-309 SS Dogs
Post by: alantani on January 04, 2013, 10:30:29 AM

can i get some? ;D

Title: Re: 15-500 and 15-309 SS Dogs
Post by: Alto Mare on January 04, 2013, 11:25:59 AM

Lee, where did you get that dog with the cutout?

Title: Re: 15-500 and 15-309 SS Dogs
Post by: Jimmer on January 04, 2013, 02:54:58 PM

Popped open a 500 , no cut outs on the dogs on mine, can I get some too?

Title: Re: 15-500 and 15-309 SS Dogs
Post by: Keta on January 04, 2013, 04:00:57 PM

Quote from: Alto Mare on January 04, 2013, 11:25:59 AM
Lee, where did you get that dog with the cutout?

It was in a newer 501 I took apart to test the dog in. It has a fine thread gear sleeve and a 10-505 star. I like the idea and if we think it is an improvement I have it drawn up and cutting is easy.

Quote from: alantani on January 04, 2013, 10:30:29 AM
can i get some? ;D

Yup, as soon as they get cut (Tuesday I hope, the cutter will be out Monday) cleaned and polished.

When I picked up the last test run we talked about a big contract they are working on and they are considering a lazer cutter. I do not know how clean they cut or if it leaves too much slag to clean up.

Quote from: Jimmer on January 04, 2013, 02:54:58 PM
..... can I get some too?

Yup, I can have one piece or 1000 pieces cut and the drawing is done.

Title: Re: 15-500 and 15-309 SS Dogs
Post by: bluefish69 on January 04, 2013, 05:25:49 PM

I received Dogs from Scott's with that cut out in Brass.

I am putting my project on hold till I can buy 12 SS Dogs

Title: Re: 15-500 and 15-309 SS Dogs
Post by: BMITCH on January 04, 2013, 05:35:20 PM

I recently ordered these dogs for the 500 series from Scott's. They came with the cutout.

Title: Re: 15-500 and 15-309 SS Dogs
Post by: Irish Jigger on January 04, 2013, 05:56:54 PM

Chinese Dogs? :-\

Title: Re: 15-500 and 15-309 SS Dogs
Post by: Keta on January 07, 2013, 05:22:56 PM

The reel I pulled the dog out of was pre move.

Title: Re: 15-500 and 15-309 SS Dogs
Post by: Irish Jigger on January 07, 2013, 07:53:29 PM

Quote from: Keta on January 07, 2013, 05:22:56 PM
The reel I pulled the dog out of was pre move.

Thank's Lee.

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn 99/Jigmaster/SurfMaster/Squidder Tutorials and Questions => Topic started by: Keta on January 03, 2013, 08:43:47 PM