Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => Smoothdrag.com => Topic started by: outsiderskip on January 06, 2013, 12:37:31 AM

Title: trynos30
Post by: outsiderskip on January 06, 2013, 12:37:31 AM
dawn
alan suggested that u might know the dementsions
need a set off 4 bearings for a tryno30
single speed lever drag
can you help and price shipped to australia
ty pete
Title: Re: trynos30
Post by: Dawn on January 08, 2013, 11:26:31 PM
http://fish.shimano.com/media/fishing/SAC/techdocs/en/Conventional/05TYR30_v1_m56577569830615692.pdf

TGT0827  7x17x5   $8.00
TGT0813  9x20x6    $15.00
TGT0641  7x14x5 x 2   $8.00 each

Dawn


Title: Re: trynos30
Post by: outsiderskip on January 09, 2013, 01:32:57 AM
dawn i managed to get lever wind out but number didnt correspond
my number was 9x20x6
Title: Re: trynos30
Post by: Dawn on January 09, 2013, 05:03:36 PM
That's it, just a typo on my part.
Title: Re: trynos30
Post by: outsiderskip on June 07, 2014, 06:51:50 PM
dawn
are the sizes the same in a tyrnos 20
im sure winder bearing is different
pete
Title: Re: trynos30
Post by: Bryan Young on June 08, 2014, 12:26:07 AM
The should be all the same as the 20 is a narrow 30.
Text only | Text with Images