I am working on a couple of Penn Mag 10's
I ordered some new bearings from a reputable source. They said it was the same end bearings as a Squidder.
It's not, no big deal I will just order the right ones , can anyone help with the correct bearing size?
The ones I received are .125x.500x .1719
The bearing I removed are smaller OD
Thanks
JY
Checkes out a link to Nutter Rod and Reel service printed out parts list.
Looks like the bearings are the same as 113H bearings.
P/N 055-113H and 026-113H
113H bearings are .125 x .375 x .1562 (1/8"x 3/8"x 5/32".)
Thank You, I had ordered some 113h bearings today. Assuming that the P/N with 113h at the end meant that the 113 and mag 10 used the same bearing.
To further check I looked at smooth drags site and saw that 113h and 505hs shared a common bearing. Test fit a bearing from my 505 in mag 10 seems to work.