Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Okuma Tutorials and Questions => Topic started by: threejs on January 29, 2013, 04:30:59 PM

Title: tg 30 and tg50 maintenance question
Post by: threejs on January 29, 2013, 04:30:59 PM
I bought the reels on ebay two years ago without doing my homework. they have been pretty good except a handle bent badly on one of them. I bent it back and it's been ok, is there an upgraded handle available? should I swap out the drag washers? I cannot get the handle nut off of the tg50. is there a trick to this? I'm new to the forum. Looks like losts of great info!!! Thanks, John
Title: Re: tg 30 and tg50 maintenance question
Post by: Bryan Young on January 29, 2013, 06:56:22 PM
Sorry John, I haven't seen one of these reels yet.  I'm sure someone here has though.
Title: Re: tg 30 and tg50 maintenance question
Post by: alantani on January 30, 2013, 02:21:27 AM
are these the titus gold reels?  single speed or two?  oh, and welcome!!!!
Title: Re: tg 30 and tg50 maintenance question
Post by: Jimmer on January 30, 2013, 02:25:46 PM
The handle nut on my 30 2 speed is a left hand thread. You should be able to follow Alan's TS50II tutorial, essentially the same reel.
Title: Re: tg 30 and tg50 maintenance question
Post by: threejs on January 30, 2013, 07:24:24 PM
alan, yes titus gold 30 and 50
Title: Re: tg 30 and tg50 maintenance question
Post by: alantani on January 31, 2013, 12:30:19 AM
you should already have carbon fiber drag washers in them already.  here is the titus gold 15 II post.  it would cover the other reels. 

http://alantani.com/index.php?topic=43.0
Text only | Text with Images