Hi there !
I wonder if anyone knows if there's a service tutorial to find for an Ambassadeur 7700 Mörrum ? I got one from a friend that asked if could have a look at it ? The reel is in quite bad shape. Some screws and components are stuck (saltwater). So before I start to use "hard hands" on the reel it would be nice with some picks.
Thanks in advance..... !
G'day Drisse,
Morten did a 6600CL Morrum tutorial here: http://alantani.com/index.php?topic=5665.0 (http://alantani.com/index.php?topic=5665.0)
It's not exactly the same, but shares many commonalities and should be a good starting point.
- Schematic for the 7700CL here: http://www.abugarcia.com/sites/default/files/schematics/MORRUM7700CL%200700.PDF (http://www.abugarcia.com/sites/default/files/schematics/MORRUM7700CL%200700.PDF)
- And the 7700CT here: http://www.abugarcia.com/sites/default/files/schematics/MORRUM7700CT%200700.PDF (http://www.abugarcia.com/sites/default/files/schematics/MORRUM7700CT%200700.PDF)
Hope that's of some assistance.
Let us know if you run into any difficulties.
Good luck, Justin
Justin how's the wing? Dominick
G'day Dominick,
Healed up well, thanks - as of first of Feb, I was back on the bike.
However, with a couple of months' pent-up enthusiasm, I promptly overshot a jump and separated my shoulder, but at least the arm's all good ;) ;D
Another two-week lay-off, then should be in flying form.
Hope all's well with you and yours.
Cheers, Justin
Justin, I'm glad the arm is better but sorry about the shoulder. I hope you have better luck when it heals. :) Bob
Cheers Bob - unlike reels, bodies heal themselves, so no worries :D
We've got kinda off-topic, so hopefully Drisse has what he needs ;)