Print Page - hello please help

Title: hello please help
Post by: alcal on March 28, 2013, 12:00:25 AM

Hi all,

new on here and was hoping someone could point me to a tutorial for servicing a pair of Shimano Tekota 600LC's. Thanks

Title: Re: hello please help
Post by: Bryan Young on March 28, 2013, 12:30:34 AM

Try http://alantani.com/index.php?topic=357.0. This should be close enough.

Title: Re: hello please help
Post by: Bill B on March 28, 2013, 01:01:52 AM

Welcome from the Sacramento Delta, where you from? and what do you like to fish for?

Title: Re: hello please help
Post by: BMITCH on March 28, 2013, 01:04:29 AM

Welcome!

Title: Re: hello please help
Post by: alcal on March 28, 2013, 01:19:04 AM

Thanks Guys,

I am live in Mill Valley, Marin Co, and fish salmon, tuna, and rock fish. Can't wait to get out for some salmon on the 5th opener and will be working on the boat and gear till then. First time take one of these reels apart but here goes. Thanks again.

Title: Re: hello please help
Post by: Cone on March 28, 2013, 01:34:26 AM

Welcome. Bob

Title: Re: hello please help
Post by: Keta on March 28, 2013, 01:58:36 AM

Hi.

Title: Re: hello please help
Post by: Dominick on March 28, 2013, 02:34:06 AM

Hello and welcome from San Mateo, CA. Dominick

Title: Re: hello please help
Post by: saltydog on March 28, 2013, 02:37:25 AM

Welcome from Texas.
William

Title: Re: hello please help
Post by: Alto Mare on March 30, 2013, 08:51:30 PM

Welcome and enjoy your stay.
Sal

Title: Re: hello please help
Post by: Keta on March 30, 2013, 09:15:57 PM

Title: Re: hello please help
Post by: alantani on March 31, 2013, 03:39:27 AM

here are the carbontex prices http://www.smoothdrag.com/Carbontex_Retail_Prices_6_2012-1sheet.html and here is the ordering info. http://smoothdrag.com/ please let us know if you have any problems.

Title: Re: hello please help
Post by: Dr. Jekyll - AKA MeL B on April 01, 2013, 04:52:55 PM

welcome to Mr. Tani's neighborhood...

Reel Repair by Alan Tani

Welcome! => Welcome! => Topic started by: alcal on March 28, 2013, 12:00:25 AM