Print Page - Mitchell 302 drag washers

Title: Mitchell 302 drag washers
Post by: rocksteady on April 20, 2013, 07:01:11 PM

I can't seem to find replacement washer stack for a 1960's era 302. Can anyone help ? Will drags from another company work ? The reel is in great shape. I took it apart for a good cleaning and have somehow lost the drag washer stack. Thanks ahead of time. ???

Title: Re: Mitchell 302 drag washers
Post by: Mike La Franchie on April 20, 2013, 07:11:15 PM

ask dawn at smoothdrag.
She knew what washers to put into my Mitchell quartz 350.

Title: Re: Mitchell 302 drag washers
Post by: Bryan Young on April 20, 2013, 07:34:07 PM

I use HT-100s.

Let me see if I have a reel around to see what washers I had used and will put a set together for you. Send me a pm with your address and I'll get those washers to you. Just send me a check after you receive them for the cost. Do you want them per greased?

Bryan

Title: Re: Mitchell 302 drag washers
Post by: rocksteady on April 20, 2013, 09:29:55 PM

Thanks very much Bryan. PM on the way :)

Title: Re: Mitchell 302 drag washers
Post by: rocksteady on April 20, 2013, 09:37:40 PM

I knew there was a spring of some type. I found this pic online :

(http://i46.tinypic.com/maxpfo.jpg)

Title: Re: Mitchell 302 drag washers
Post by: Bryan Young on April 20, 2013, 10:28:16 PM

So I looked through my inventory, and I do not have those metal washers and spring and stuff. I hope someone here can help.

Bryan

Title: Re: Mitchell 302 drag washers
Post by: Irish Jigger on April 21, 2013, 09:25:16 AM

Check this out,may help.

http://www.stripersonline.com/t/734755/mitchell-302-penn-drag-upgrade

Reel Repair by Alan Tani

General Maintenance Tips => General Questions and Trouble Shooting => Topic started by: rocksteady on April 20, 2013, 07:01:11 PM