Print Page - Penn SS Bearings

Title: Penn SS Bearings
Post by: Black Widow Tackle on April 27, 2013, 08:59:19 PM

I have seemed to miss place my calipers can anyone tell me the bearings sizes for there reels

650ss

750/850ss

and

9500ss

Thanks, Andrew

Title: Re: Penn SS Bearings
Post by: Cone on April 28, 2013, 12:43:35 AM

Andrew, the 750/850ss reel uses 3 3/8 x 7/8 x 9/32 (.375 x .875 x .2812) bearings.
The 9500ss uses 2 3/8 x 7/8 x 9/32 bearings for the side plates and 1 10mm x 26mm x 8mm bearing for the pinion.
The 6500ss uses 2 3/8 x7/8 x 9/32 bearings for the side plates. I don't have the pinion bearing size written down. I hope someone else can help. Bob

Title: Re: Penn SS Bearings
Post by: Black Widow Tackle on April 28, 2013, 01:06:21 AM

Thanks Bob, so the 750 and 850 use all the same size bearings?

Title: Re: Penn SS Bearings
Post by: Alto Mare on April 28, 2013, 02:22:37 AM

the 750 and 850 are the same reel. the 850 has a larger rotor and spool for more line capacity, everything else is the same.
Sal

Title: Re: Penn SS Bearings
Post by: Cone on April 28, 2013, 03:46:48 AM

Roger that, Andrew. The pinion and bearings in the sides are all the same size on the 750 and 850ss. Bob

Title: Re: Penn SS Bearings
Post by: Black Widow Tackle on April 29, 2013, 06:33:42 PM

Thanks for the info!!!!

Reel Repair by Alan Tani

Spinning Reel Rebuild Tutorials and Questions => Penn => Topic started by: Black Widow Tackle on April 27, 2013, 08:59:19 PM