Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Pro Gear Tutorials and Questions => Topic started by: handi2 on April 27, 2013, 09:54:44 PM

Title: Pro Gear Nylon Washer 12-509 Needed
Post by: handi2 on April 27, 2013, 09:54:44 PM
Hello,

When I threw one of my Pro Gear reels in the washer today I forgot to remove the nylon washer that goes on the reel body under the freespool lever..! Key #12 Part number 12-509. Does anyone have one of these? Was this part made by Penn? I checked for a Penn part and came up with nothing.

Thank you,

Keith the Dummy for Today..!!
Title: Re: Pro Gear Nylon Washer 12-509 Needed
Post by: handi2 on April 27, 2013, 10:52:27 PM
I believe the same part is Penn's part #26-113M for the Metal Body Penn 113. It has to be the same ID b/c the eccentrics are the same. The retail on this part is over $15.00 at Scott's. If anyone has one please let me know..!!

Lessons learned :-[
Title: Re: Pro Gear Nylon Washer 12-509 Needed
Post by: Bryan Young on April 27, 2013, 11:51:45 PM
Which pro gear reel?
Title: Re: Pro Gear Nylon Washer 12-509 Needed
Post by: handi2 on April 28, 2013, 07:44:17 PM
It's a 541. I looked on my others and found it was just a flat nylon washer. I first thought it was a nylon bushing that fit onto the eccentric but it only fits the outside. No problems now.

Thank you,

Keith
Title: Re: Pro Gear Nylon Washer 12-509 Needed
Post by: Bryan Young on April 28, 2013, 07:46:22 PM
Very good :)
Text only | Text with Images