Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn 99/Jigmaster/SurfMaster/Squidder Tutorials and Questions => Topic started by: Black Widow Tackle on May 01, 2013, 10:56:14 PM

Title: Penn 500 ?
Post by: Black Widow Tackle on May 01, 2013, 10:56:14 PM
With my jigmaster 500 what can I convert it too with a frame and spool change?  Thanks!
Title: Re: Penn 500 ?
Post by: Bryan Young on May 01, 2013, 11:05:58 PM
Penn 501 or Penn 99 as far as I know.
Title: Re: Penn 500 ?
Post by: Ron Jones on June 27, 2013, 07:00:53 AM
This is a couple months old but you can also look around and find a Newell yellowfin special kit from time to time. It is a wide 500. I don't know how the yellow Fin is on a 500 and the yellow Tail in on the 4/0, but that is how Carl named them.

Ron
Title: Re: Penn 500 ?
Post by: erikpowell on June 27, 2013, 08:27:31 PM
ok, i finally gotta ask a dumb question....
i've never heard what the difference is between a 500 jig master and a 99 ....(jig master??)
Bryan, lemme hear it   ;D

Title: Re: Penn 500 ?
Post by: Ron Jones on June 27, 2013, 08:43:34 PM
The Pen 99 SilverBeach is a slow reel (surfmaster I think?) that is the same diameter as the Jigmaster but it's width is between the 500 and 501. You can take a 500/501 right side plate and bolt it to a Silver Beach and end up with an intermediate width Jigmaster that most call an "Albacore Special." Basically a 501 lacks adequate capacity for albacore fishing with straight mono and a 500 is a bit bigger than most want so the 99 solution is nice. The jigmaster is faster and as better drags than the 99.

Ron