im after a schematic for a daiwa sealine 200.
its an oldie,bushes,(no bearings)
its got a rusted spring in the side plate for the clicker
dont know if part of it has rusted away
thanks for any help.
Are you sure it's a 200? I know a 250 has bushings. I don't see a 200 anywhere
yep dayone
its a 200 made in japan
ill try and post a pic,
could a moderator pls move this to the
correct site
(http://i1200.photobucket.com/albums/bb326/wallacewt/IMG_1691_zps6d25cb90.jpg) (http://s1200.photobucket.com/user/wallacewt/media/IMG_1691_zps6d25cb90.jpg.html)
that spring clip on the right is 1 problem.
there is also another clip that fell out.
this reel was a hell of a mess but its cleaning up alright
dayone
could you send me the link for the 250 sealine
http://daiwa.com/PartsDiagram/PartsDiagram/SL250H.pdf
thks dayone.
i looked at that,nothing like it
i got the reel done except for the clicker
its got me beat.ill try 2 more pics,see if that helps
(http://i1200.photobucket.com/albums/bb326/wallacewt/IMG_1694_zps85da609b.jpg) (http://s1200.photobucket.com/user/wallacewt/media/IMG_1694_zps85da609b.jpg.html)
(http://i1200.photobucket.com/albums/bb326/wallacewt/IMG_1695_zpsc564f928.jpg) (http://s1200.photobucket.com/user/wallacewt/media/IMG_1695_zpsc564f928.jpg.html)
I have not seen one of those before. Sorry.
About the bushing, if it comes out, you may find a bearing in the same size that will fit instead.
thanks bryan
i wont swap them around
clients already up for $75 and unless he,s in love with it
its not worth it.
there were parts missing,that i had to make
4 new cf washers also.etc;
if it was mine id disconnect it and go fish
solid reel.similar to a senator.