Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Pro Gear Tutorials and Questions => Topic started by: Snagged2 on May 13, 2013, 08:45:52 PM

Title: CS 650 Part
Post by: Snagged2 on May 13, 2013, 08:45:52 PM
Hello,,

I'm trying to source the Left (clicker) side bearing cup for a Pro Gear 650

The threads seem to be proprietary as, any of the assortment I have around aren't able to work..

Have tried Penn, and Accurate bearing cups, but, thread fitment is not correct..

If anyone has one in their pocket,, I'll be glad to purchase it!
Title: Re: CS 650 Part
Post by: Bryan Young on May 13, 2013, 09:37:10 PM
contact Randy Kao at RandyhKao@aol.com.  He should have these.
Title: Re: CS 650 Part
Post by: alantani on May 14, 2013, 05:16:21 AM
i have one that MIGHT fit.  send me an e-mail with your address and i will send it out to you.  they cost $10 with shipping.   :-\
Title: Re: CS 650 Part
Post by: Snagged2 on May 14, 2013, 09:00:07 PM
Email sent, Thank You Alan.. hope it will work!
Title: Re: CS 650 Part
Post by: alantani on May 15, 2013, 07:32:46 AM
me, too!   i wil send it out in the morning. 
Title: Re: CS 650 Part
Post by: Snagged2 on May 18, 2013, 03:54:17 AM
The part WORKED!!!  many Thanks..  ;D

Title: Re: CS 650 Part
Post by: alantani on May 18, 2013, 06:04:21 AM
just dumb luck.....   ;D
Text only | Text with Images