A while back someone was asking about replacing the sideplate screws on the Penn 113----- and I checked it out and found that the thread size/pitch is 4-40 size 4 machine screw and 40 threads per inch.....most good hardware stores will carry these either in stainless, or brass either slotted or phillips with an oval head............in various lengths......they are very reasonably priced considering that they make you happy!!!!!!sometimes its the little things in life that brings happiness to a reel................gstours
You're sure about 4-40? Not UNC 5-40? Because that was what I was told. Haven't been able to try it myself though yet.
Thanks for the post!
/Karl
You're right Karl, it is 5/40....easy mistake.
Yea, I was just wondering as I'm about to order some screws for my 113. Have to order them from the UK so I'd rather get it right the first time..
:)
/Karl
Order them by part number and not size as they are different lengths. The 113 takes 32-17,39-3 and 39-9.
Thanks Tom!
:)
/Karl