Print Page - Tib frame for 114h

Title: Tib frame for 114h
Post by: basto on May 23, 2013, 09:46:47 PM

I am putting a Tiburon frame on my 6/0. Do I need to buy longer screws in place of the old shorter stand screws?
Thanks.
Basto (http://i1286.photobucket.com/albums/a601/george8322/114hright_zps6ca548f3.jpg)

Title: Re: Tib frame for 114h
Post by: RowdyW on May 23, 2013, 10:26:31 PM

Hi Basto, Tiburon says its not neccissery but I would. The shorter screws will be easy to strip in the aluminum. Just don't get the middle bottom one to long because it might interfere with the clamp stud. Rudy

Title: Re: Tib frame for 114h
Post by: BMITCH on May 23, 2013, 11:14:25 PM

I agree with Rudy. You can use the screws you have........but. I went with longer ones greased.
Bob

Title: Re: Tib frame for 114h
Post by: basto on May 23, 2013, 11:42:54 PM

Thanks for the replies guys. Just got to wait a while now.
Basto

Title: Re: Tib frame for 114h
Post by: Bryan Young on May 24, 2013, 12:29:21 AM

A friend of mine just showed me a solid frame and sideplate for the 114H similar to the traditional ProGear Reels. As soon as I can get my hands on one, I'll post some pics. I think he wants $250ish for a complete reel. I want to see if he is willing to sell just the frames and sideplates.

Title: Re: Tib frame for 114h
Post by: john2244 on May 24, 2013, 01:01:42 AM

I would like to see that Bryan. When you say like a Progear, you mean the frame and the none handle side plate are all one piece ?? I hope you are able to post pics.
John

Title: Re: Tib frame for 114h
Post by: fastfishin85 on May 25, 2013, 06:08:41 AM

id love to see that as well

Title: Re: Tib frame for 114h
Post by: BMITCH on May 25, 2013, 11:05:15 AM

That would be something to see. Who made the frame?

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: basto on May 23, 2013, 09:46:47 PM