I am at a loss as to what is making a grinding sound when reeling up. I've had the side plates off and didn't notice anything visually wrong but maybe I didn't reassemble properly.
Also, where do I get the little grommets that go on the side plate screw holes?
If the spool is not rubbing against the sideplate, the greats may be dirty and could use a good craning and regreasing.
And I thought I was bad with spelling, at least I have an excuse I'm from another country. :-\
Go get some rest Bryan ;D.
Does anyone have a pictorial on how to re-assemble the reel?
On the spool, there is a white plastic collar with 2 protrusions that fit into the spring-loaded pawls (ie antireverse pawls/dogs). When reassembling, put the spool into the right side plate, and make sure that the 2 protrusions from the plastic collar go into the corresponding holes of the pawls. When in proper position, screw in the preset knob to secure the spool.
I must have fumbled with this for 3 to 4 hours before finally getting it right.
I kept putting the spool into the frame first, and then just slapped the right side plate on. The reel was very noisy when cranked and the anti-reverse wouldn't engage.
Quote from: Alto Mare on May 26, 2013, 04:58:51 PM
And I thought I was bad with spelling, at least I have an excuse I'm from another country. :-\
Go get some rest Bryan ;D.
Oops. It's called big fingers, small iPhone.
This is the white washer.
And these are the slots on the pawls.
Photos stolen from Alan's Titus Silver 50 rebuild post
http://alantani.com/index.php?topic=15.0
(http://i1099.photobucket.com/albums/g387/pork190/DSCN3061-123.jpg) (http://s1099.photobucket.com/user/pork190/media/DSCN3061-123.jpg.html)
(http://i1099.photobucket.com/albums/g387/pork190/DSCN3072-123.jpg) (http://s1099.photobucket.com/user/pork190/media/DSCN3072-123.jpg.html)
(http://i1099.photobucket.com/albums/g387/pork190/DSCN3100-123.jpg) (http://s1099.photobucket.com/user/pork190/media/DSCN3100-123.jpg.html)
Quote from: Bryan Young on May 27, 2013, 02:00:06 PM
Quote from: Alto Mare on May 26, 2013, 04:58:51 PM
And I thought I was bad with spelling, at least I have an excuse I'm from another country. :-\
Go get some rest Bryan ;D.
Oops. It's called big fingers, small iPhone.
Whew! I thought it was your accent. ;D Bob