Hi Dawn,
I'm looking for the two bearings that fit on the drive gear of the SS2600. The Daiwa part number is E15-4001. Do you have these available?
Thanks,
Bob
it's going to be a standard size and in whole millimeters. can you measure them out?
I suppose I could. I will go to Staples tomorrow to see if they have a ruler in millimeters. What measurements will I need? OD, ID and height?
yup. and i'll bet that gorgeous daughter of yours already has such a ruler!
OK, I have good news and bad news.
The good news is, you were correct Alan, she did have a ruler. And thank you for the nice compliment. :)
(http://i1358.photobucket.com/albums/q767/BobFate/Daiwa_HK_ruler_zpsb307bf8c.jpg) (http://s1358.photobucket.com/user/BobFate/media/Daiwa_HK_ruler_zpsb307bf8c.jpg.html)
The bad news is, I opened this reel quite awhile ago (2 years ago ;D), and what I didn't remember was that I threw out the broken, rusted bearings when I did. :P
Any suggestions?
call daiwa at 562-375-6800. try to find the schematic first. :-\
got it! http://www.mikesreelrepair.com/schematics/albums/daiwa/Daiwa_SS2600.pdf
I called Daiwa and I have to tell you, I was a bit surprised at how quickly they were able to find an answer for me. I was fully expecting to be transferred around about 6 or 7 times before being told something like, "We don't have that information here, you'll have to measure it yourself." Maybe I'm just getting used to getting poor customer service, and I assumed the worst.
Anyway, I was connected with Toby and after about 30 seconds he was able to give me the dimensions. Great experience there. 8)
The dimensions are 8 ID X 14 OD X 3.5. Does Smooth Drag carry this size?
Hi
Sorry I don't have that one.
Dawn
i should have that one. send me an e-mail and i can send it out. it looks like it should be packed with grease.
Email sent. Thank you Alan.
i will try to get it out to you tomorrow.