Should roller clutch assembly be greased? I've heard that it may slip if greased
G'day and welcome CV,
Never grease the A/R bearing (aka 'roller clutch').
Light oil only.
All the best, Justin
Good advice for a newbie, thanks Justin
i use corrosion x.
If you look closely at a roller (One way Bearing) you will see that it works by moving the rollers into or away from the main shaft.....
I dont think the grease it so slippery that is causes slippage..
BUT it keeps the rollers from moving as they have to & clamp the main shaft...
Good cleaning & Light oil only!!!!!!!!!!!!