Text only | Text with Images

Reel Repair by Alan Tani

General Maintenance Tips => Smoothdrag.com => Topic started by: pcde123 on June 22, 2013, 07:37:35 PM

Title: size of carbontex washers for penn peerless no 9 and penn longbeach 68
Post by: pcde123 on June 22, 2013, 07:37:35 PM
size of carbontex washers for penn peerless no 9 and penn longbeach 68
Title: Re: size of carbontex washers for penn peerless no 9 and penn longbeach 68
Post by: RowdyW on June 22, 2013, 08:11:06 PM
For the LB 68 use 3 of 6-113  .800X.420X.040  or  5 of 6-60  .800X.415X.030   Penn HT-100 numbers
Title: Re: size of carbontex washers for penn peerless no 9 and penn longbeach 68
Post by: akfish on June 22, 2013, 08:15:06 PM
Get size 155 for the 9 and size 140 for the 68. The 140 washers are thinner than the 006 113 HT-100s from Penn, so you can make a 5 stack drag system if you get a couple more metal drag washers.
Text only | Text with Images