Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: Fullaphish on February 22, 2010, 12:06:28 AM

Title: 113h bearing retainer
Post by: Fullaphish on February 22, 2010, 12:06:28 AM
 do i need to keep the bearing retainer on the clicker side on the 113h it looks like it may freespool better without it? ???
Title: Re: 113h bearing retainer
Post by: alantani on February 22, 2010, 10:43:37 PM
i leave them off.  it makes it easier to clean, lube or remove them.  alan
Title: Re: 113h bearing retainer
Post by: Fullaphish on February 22, 2010, 10:46:38 PM
I noticed that i can only order the complete bearing assemble at mysticparts.com.  Is there a better place to source just the bearing (maybe another part number at mysticparts?).


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
Title: Re: 113h bearing retainer
Post by: Irish Jigger on February 23, 2010, 12:12:01 AM
The bearing is 0.1250 x 0.3750 x 0.1562 inch and is relatively easy to extract from the housing. No need to buy the whole assembly.
Should be available from Boca Bearings.
Title: Re: 113h bearing retainer
Post by: alantani on February 23, 2010, 09:09:08 AM
yup!
Text only | Text with Images