Does anyone know what the distance between the post holes on the clamp is. Im trying to find a replacment for my pro gear 541. The 113 clamp is too small so im hoping maybe the 114 will fit.
Thanks.
Give me your measurements and I'll check and see what I have. Just let me know if you're going center to center or from the outside.
post center to post center on the reel is 1 5/8th's inches (1.625"). If you have anything that would work that would be great. Thanks.
center to center of the bolts, they can be as close as 1.625 inches and as far apart as 2.000 inches. just measure the 6/0 penn clamp.
https://www.mysticparts.com/PennParts/Parts/33C-114H.aspx (https://www.mysticparts.com/PennParts/Parts/33C-114H.aspx)
"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"
The Penn 113h clamp will work on a Pro Gear 545.
Quote from: luckylogger6 on July 25, 2013, 04:32:52 AM
post center to post center on the reel is 1 5/8th's inches (1.625"). If you have anything that would work that would be great. Thanks.
I just checked what I have. The 6/0 is 2" center to center, the 4/0 is 1 3/8".
I have a few other, I measured all and they are the same as the penn 33-200, 1 3/8"
You might have to make one by enlarging the holes a little :-\.
If you still need the 1 3/8", let me know and I'll send it out.
Sal