Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn Senator Tutorials and Questions => Topic started by: rac37 on March 10, 2010, 10:28:04 PM

Title: penn 113h
Post by: rac37 on March 10, 2010, 10:28:04 PM
i have a penn 113h special senator i use for cod fishing on a trip monday i was reeling in a fish and the handle star and all went backwards and the spool let loose? it did this a few times.what should i look for when i break it down?
Title: Re: penn 113h
Post by: alantani on March 11, 2010, 12:17:23 AM
hopefully the dog is just gummed up.  worst case you have damage to the dog, the gear sleeve or both.  can you let us know?  thanks!  alan
Title: Re: penn 113h
Post by: rac37 on March 11, 2010, 02:53:46 AM
thanks i'll take a look.
Title: Re: penn 113h
Post by: rac37 on March 13, 2010, 02:18:21 PM
just took it apart.the gear sleeve[98-320] is worn.should i be looking for anything else while its open?
thanks again.
Title: Re: penn 113h
Post by: akfish on March 13, 2010, 03:34:41 PM
If the gear sleeve is bad, you'll also need to replace the dog.
Title: Re: penn 113h
Post by: wish I was fishing on March 13, 2010, 04:41:16 PM
The fibre washer under the main gear will probably want replacing too
Title: Re: penn 113h
Post by: alantani on March 13, 2010, 04:58:23 PM
that means that the dog HAS to be damaged as well.   :-\
Title: Re: penn 113h
Post by: rac37 on March 13, 2010, 08:11:50 PM
thanks guys.i picked up the parts today and fixed it,the gear,pin,dog,dog spring and washer all for $15,hopfully i can get out one more time,thanks again,rob
Text only | Text with Images