What size ht-100 for the 4/0? And a red side 6/0 would take the same washer as the 9/0 right?
Which 4/0? The 113H or the black 113? On the black 113 use a Penn 6-113 (HT-100) or if you have clearance problems use a Smoothdrag #5 carbontex. On the 113H you can use a Penn 6-113H washer.
Yes, the red 114H uses the same washer as the 9/0.
George
113h, and thanks
If you order your CF washers from Smooth Drag it comes with the right CF under washer.
Quote from: Keta on August 10, 2013, 02:42:01 AM
If you order your CF washers from Smooth Drag it comes with the right CF under washer.
The CF washer Lee is referring to is Smoothdrag's #12 carbontex. The outer diameter is smaller than the HT-100 and it works nicely under the main gear of the 113H and the 349's.
Thanks guys. I broke down my 4/0w last night, never serviced it before cause the guy I bought it from said he had serviced it. At the top of the stack it was two CFs and then two metals, I fixed it and now I need to test the drag, cause it was pulling 22lbs!
90% of the Senators I buy have the drag stack in the wrong sequence. :P
Quote from: Shark Hunter on August 13, 2013, 07:32:12 PM
90% of the Senators I buy have the drag stack in the wrong sequence. :P
They're not mine ;D
What about this one? What a deal! Only 20 bucks and 10 shipping on fleabay! lol :D
Looks like a Frankenstein reel. The eccentric looks too long as well.
(http://i1300.photobucket.com/albums/ag93/darondyer/Frankenstein114_zpscd47e8f0.jpg)
Well, I suppose ugly is as ugly does. ;) I wouldn't put too much umph on that handle. ;D
How does the rest of the reel look?
Not too bad. It already has a bid. I just can't get over that power handle!!!! :o Definitely a fixer upper! I would actually buy this if it weren't for the wrong eccentric lever, but the deal breaker is the handle nut. looks pretty rounded. I actually have all the parts this Frankenstein needs. Just didn't want to use them up all at once.
(http://i1300.photobucket.com/albums/ag93/darondyer/T2eC16NHJGYFFkvsIle3BSBnKIDhW60_57_zps8b90c3ac.jpg)
Talk about a butcher job, welcome to the meat market. ::)
How much for it? I do need a main gear.......I f I can't find it in the rest of my junk
I posted it just because I thought it was funny! :D
Its not mine. If you want it, you are on your own.
I'm digging the two color line and the 4 hole power handle
Lifes a Garden, Dig it! :D